Configuration
This document provides the configuration options for the Livepatch server.
The configuration below applies to the Livepatch Server operator charms and Server snap.
For our reactive charm (or if your deployment config doesn’t match the below), please see here.
Setting config
Depending on your deployment you may be using Juju + charms or a standalone Snap to deploy the Livepatch server. How you setup config will differ slightly between the two.
Default and example values are available on the respective machine and K8s charm config pages.
Juju
The config values in the table below map directly to the config options exposed by the Livepatch charms (except where otherwise stated).
Assuming the Livepatch server has been deployed with the alias livepatch, to change a config value run:
juju config livepatch <key>=<value>
# E.g. to enable basic auth
juju config livepatch auth.basic.enabled=true
See the Juju docs for all the ways you can apply config.
Snap
The config values in the table below map directly to the config values accepted by the Livepatch server snap. An additional value must be added to all commands as shown below.
To change a config value run:
sudo snap set canonical-livepatch-server lp.<key>=<value>
# E.g. to enable basic auth
sudo snap set canonical-livepatch-server lp.auth.basic.enabled=true
Config
The following sections describes what configuration values are available.
Server config
The following config values determine the server’s behavior around concurrency limits, log level, etc.
| Name | Description | Value(s) |
|---|---|---|
server.log-level |
Log level for the server | debug, info, warn, error, dpanic, panic, fatal |
server.url-template |
The template URL to redirect clients for patch downloads. For example: https://my-file-server.com/{filename}. |
string |
server.server-address |
Listen address for the server | url |
server.concurrency-limit |
Maximum number of API requests to serve concurrently. | integer |
server.burst-limit |
The queue limit, roughly equals concurrency-burst-limit |
integer |
server.is-leader |
In multi-server deployments, determine if this is a leader unit. Not available for charmed deployments. | bool |
server.is-hosted |
Enable configuration blocks specific to Canonical’s hosted configuration for livepatch | bool |
Admin Authentication
The following values configure authentication to the server’s admin endpoints.
Besides basic auth, only Ubuntu SSO auth is supported.
Some notes on this section:
- SSO Teams represent Launchpad teams.
- Basic auth can be a comma separated list, see here for more info.
- Basic auth passwords must be bcrypt hashed.
| Name | Description | Value(s) |
|---|---|---|
auth.basic.enabled |
Whether or not to enable basic auth. | bool |
auth.basic.users |
A comma separated list of user objects. | <user1>:<bcrypt hashed password>, <user2>:<bcrypt hashed password> |
auth.sso.enabled |
Whether or not to enable Ubuntu SSO auth. | bool |
auth.sso.teams |
SSO Auth configuration | https://launchpad.net/~team-1,https://launchpad.net/~team-2 |
auth.sso.url |
URL to access for SSO auth. | login.myasnchisdf.eu.org |
auth.sso.public-key |
Public key for the auth server. Can be a file path or the key. | string |
Ubuntu Pro
The following values configure how the server interacts with the Ubuntu Pro backend (also called the contracts server) for authenticating clients.
This is useful for Canonical’s hosted Livepatch server and airgapped deployments.
| Name | Description | Value(s) |
|---|---|---|
contracts.enabled |
Whether to connect to the contracts service | bool |
contracts.url |
URL of the contracts server | string |
contracts.user |
Basic auth user | string |
contracts.password |
Basic auth pass | string |
Database
The following values configure how the server interacts with its database.
| Name | Description | Value(s) |
|---|---|---|
database.connection-string |
Postgres connection string (unavailable for charmed deployments, handled with Juju relations) | string |
database.connection-pool-max |
Max pool for connections | int |
database.connection-lifetime-max |
Max lifetime of connections | int |
Influx
The following values configure how the server interacts with InfluxDB, used for sending aggregated KPIs.
| Name | Description | Value(s) |
|---|---|---|
influx.enabled |
Whether to enable influx KPI reporting (hosted) | bool |
influx.url |
URL of the Influx server | string |
influx.token |
Auth token | string |
influx.bucket |
Bucket to use | string |
influx.organization |
Org where bucket resides | string |
Patch Storage
The following values configure how the server interacts with its patch storage.
See our how-to on patch storage.
| Name | Description | Value(s) |
|---|---|---|
patch-storage.type |
File storage type to use for on-prem deployment patch syncs | oneof: filesystem,swift,postgres,s3 |
patch-storage.filesystem-path |
File path to directory to use for storage | string |
patch-storage.swift-username |
User of account | string |
patch-storage.swift-api-key |
Auth API key | string |
patch-storage.swift-auth-url |
Auth Url | string |
patch-storage.swift-domain |
Swift domain to connect to | string |
patch-storage.swift-tenant |
Swift tenacy | string |
patch-storage.swift-container |
Swift container bucket | string |
patch-storage.swift-region |
Swift region | string |
patch-storage.postgres-connection-string |
Postgres connection string (can be left blank in charmed deployments to use Juju relations) | string |
patch-storage.s3-bucket |
S3 Bucket to store patches | string |
patch-storage.s3-endpoint |
S3 endpoint | string |
patch-storage.s3-region |
AWS Region for S3 | string |
patch-storage.s3-secure |
Whether to perform secure transfers | bool |
patch-storage.s3-access-key |
AWS Access key | string |
patch-storage.s3-secret-key |
AWS Secret key | string |
Patch Cache
The following values configure the server’s patch cache.
| Name | Description | Value(s) |
|---|---|---|
patch-cache.enabled |
Whether or not to cache patches for quicker delivery | bool |
patch-cache.cache-ttl |
TTL of patches in cache | string |
patch-cache.cache-size |
Maximum size of caching for patches. | int |
Patch Sync
The following values configure how the server syncs patches from an upstream server.
| Name | Description | Value(s) |
|---|---|---|
patch-sync.id |
ID of unit (not available in charmed deploymets) | string |
patch-sync.minimum-kernel-version |
A minimum kernel version of format “0.0.0” denoting the lowest kernel version to download patches for. For example, “5.4.0” will sync “5.4.0” and up. | string |
patch-sync.architectures |
Comma-separated list of kernel architectures to download patches for. | string |
patch-sync.flavors |
Comma-separated list of kernel flavors to download patches for. | string |
patch-sync.interval |
Automatic sync interval e.g. 12h | string |
patch-sync.machine-count-strategy |
Define the way sync reports the machine counts, either by units or by buckets. On on-prem instances the counts are bucketed and the value reported is given by lower bound of the following buckets: [1-49], [50-99], [100-499], [500-999], [1000-1999], [2000-4999], [5000-9999], [10000, ∞] |
oneof: unit,bucket |
patch-sync.send-machine-reports |
Whether or not to send machine reports | bool |
patch-sync.token |
Token used to authorise with an upstream Livepatch server. | string |
patch-sync.upstream-url |
The upstream server to pull patches from. | string |
patch-sync.sync-tiers |
Enable syncing tiers from upstream server. | bool |
patch-sync.proxy.enabled |
Enable use of a proxy when syncing patches. | bool |
patch-sync.proxy.http |
HTTP Proxy. | string |
patch-sync.proxy.https |
HTTPS Proxy. | string |
patch-sync.proxy.no-proxy |
Comma separated list of addresses that should not go through the proxy. | string |
Blocklist Cache
The following values configure the server’s patch blocklist cache.
| Name | Description | Value(s) |
|---|---|---|
patch-blocklist.enabled |
Whether or not to enable the blocklist cache. | bool |
patch-blocklist.refresh-interval |
How often to refresh the blocklist cache. | string |
KPI Reports
The following values configure how the server sends KPI reports. This requires Influx to be setup.
KPIs include aggregated information on client machines e.g. the client version, patch status, etc.
| Name | Description | Value(s) |
|---|---|---|
kpi-reports.enabled |
Whether or not to enable KPI reporting. | bool |
kpi-reports.interval |
How often to submit reports. | string |
Machine reports
The following values configure the server’s behavior with machine reports.
Machine reports are stored in Postgres and store information when client’s check-in.
| Name | Description | Value(s) |
|---|---|---|
machine-reports.database.enabled |
Whether or not to enable machine reporting to postgres. Reports are stored in the server’s postgres store. | bool |
machine-reports.database.retention-days |
Retention for the given reports. | int |
machine-reports.database.cleanup-row-limit |
Row limit for each cleanup operation. | int |
machine-reports.database.cleanup-interval |
How often to perform cleanups. | string |
Cloud delay
The following values configure the server’s behavior with cloud-delays.
| Name | Description | Value(s) |
|---|---|---|
cloud-delay.enabled |
Enable the server to delay the release of patches to clients based on their cloud/region/az | bool |
cloud-delay.default-delay-hours |
Default delay hours for clouds/regions/azs without predefined delay hours | int |